(1/3) 006-01 / 20080407 / e521_mlk1005.fm ? all specifications are subject to change without notice. smd inductors(coils) for high frequency(multilayer) mlk series mlk1005 features supports operating frequency bands of up to 12ghz with nominal inductance values from 1 to 100nh. provides high q characteristics. advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for high-frequency. because the part is non-polarized, it can be used in bulk cassette loaders. it is a product conforming to rohs directive. applications for high-frequency applications including mobile phones, high frequency modules (pa, vco, fem etc.), bluetooth, w-lan, uwb and tuners. shapes and dimensions recommended pc board pattern recommended soldering condition reflow soldering product identification (1) series name (2) dimensions (3) material code (4) inductance value (5) inductance tolerance (6) packaging style specifications packaging style and quantities handling and precautions before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150c. after mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. when hand soldering, apply the soldering iron to the printed circuit board only. temperature of the iron tip should not exceed 350c. soldering time should not exceed 3 seconds. conformity to rohs directive 1 0.1 0.1min. 0.5 0.1 0.5 0.1 weight: 1.0mg dimensions in mm 1.4 0.4 0.5 natural cooling 10s max. preheating 60 to 120s soldering 30 to 60s 230?c 250 to 260?c 180?c 150?c time(s) mlk 1005 s 2n2 s t (1) (2) (3) (4) (5) (6) 1005 1.0 0.5mm (l w) 2n2 2.2nh 12n 12nh r10 100nh s 0.3nh d 0.5nh j5% t taping (reel) operating temperature range ?55 to +125c storage temperature range ?55 to +125c [unit of product] packaging style quantity taping 10000 pieces/reel please contact our sales office when your application are considered the following: the device?s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
(2/3) 006-01 / 20080407 / e521_mlk1005.fm all specifications are subject to change without notice. electrical characteristics test equipment inductance q : hp4291a+16193a, or equivalent srf: hp8720c, or equivalent rdc: yokogawa type7561, or equivalent rated current: value obtained when current flows and temperature has risen to 20c. l, q vs. frequency characteristics inductance (nh) inductance tolerance q min. test frequency l, q (mhz) self-resonant frequency (ghz) dc resistance ( ? ) rated current (ma)max. part no. min. typ. max. typ. 1.0 0.3nh 5 100 12.0 16.9 0.10 0.05 500 mlk1005s1n0st 1.2 0.3nh 5 100 11.0 14.4 0.12 0.05 500 mlk1005s1n2st 1.5 0.3nh 6 100 9.5 12.2 0.15 0.06 500 mlk1005s1n5st 1.8 0.3nh 6 100 8.5 10.9 0.17 0.07 500 mlk1005s1n8st 2.2 0.3nh 6 100 8.0 9.6 0.18 0.08 500 mlk1005s2n2st 2.7 0.3nh 6 100 7.5 9.1 0.20 0.10 500 mlk1005s2n7st 3.3 0.3nh 7 100 7.0 8.3 0.22 0.11 400 mlk1005s3n3st 3.9 0.3nh 7 100 6.5 7.8 0.25 0.12 400 mlk1005s3n9st 4.7 0.3nh 7 100 6.0 6.9 0.28 0.13 400 mlk1005s4n7st 5.6 0.5nh 7 100 5.7 6.7 0.30 0.15 400 mlk1005s5n6dt 6.8 0.5nh 7 100 5.5 6.3 0.35 0.18 400 mlk1005s6n8dt 8.2 0.5nh 7 100 5.0 6.0 0.38 0.21 350 mlk1005s8n2dt 10 5% 7 100 4.7 5.2 0.42 0.23 350 mlk1005s10njt 12 5% 7 100 4.3 5.3 0.47 0.27 350 mlk1005s12njt 15 5% 7 100 4.0 4.8 0.50 0.33 300 MLK1005S15NJT 18 5% 7 100 4.0 4.7 0.60 0.38 250 mlk1005s18njt 22 5% 7 100 3.5 4.4 0.70 0.46 200 mlk1005s22njt 27 5% 7 100 3.0 3.9 0.80 0.53 200 mlk1005s27njt 33 5% 7 100 2.5 3.5 0.90 0.59 200 mlk1005s33njt 39 5% 6 100 2.0 3.1 1.00 0.65 200 mlk1005s39njt 47 5% 6 100 1.8 3.0 1.20 0.74 200 mlk1005s47njt 56 5% 6 100 1.5 2.6 1.30 0.84 200 mlk1005s56njt 68 5% 6 100 1.4 2.4 1.50 1.01 150 mlk1005s68njt 82 5% 6 100 1.3 2.2 1.80 1.39 150 mlk1005s82njt 100 5% 6 100 1.1 1.9 2.20 1.60 100 mlk1005sr10jt part no. inductance(nh)typ. q typ. 500mhz 800mhz 1.8ghz 2.0ghz 2.4ghz 500mhz 800mhz 1.8ghz 2.0ghz 2.4ghz mlk1005s1n0st 0.9 0.9 0.9 0.9 0.9 16 20 30 32 36 mlk1005s1n2st 1.1 1.1 1.1 1.1 1.1 15 18 28 30 33 mlk1005s1n5st 1.4 1.4 1.4 1.4 1.4 15 19 29 31 34 mlk1005s1n8st 1.7 1.7 1.7 1.7 1.7 16 21 32 33 37 mlk1005s2n2st 2.0 2.0 2.0 2.0 2.1 15 19 29 31 34 mlk1005s2n7st 2.5 2.5 2.5 2.6 2.6 17 22 33 35 39 mlk1005s3n3st 3.1 3.1 3.1 3.1 3.2 16 20 31 32 36 mlk1005s3n9st 3.7 3.6 3.7 3.7 3.8 17 21 32 33 37 mlk1005s4n7st 4.4 4.4 4.5 4.6 4.7 17 22 33 35 38 mlk1005s5n6dt 5.3 5.2 5.4 5.5 5.7 17 22 33 34 38 mlk1005s6n8dt 6.4 6.4 6.6 6.7 7.0 17 22 32 33 36 mlk1005s8n2dt 7.7 7.7 8.1 8.3 8.6 19 23 34 36 38 mlk1005s10njt 9.4 9.4 10.0 10.2 10.7 19 23 34 35 38 mlk1005s12njt 11.3 11.3 12.1 12.4 13.0 19 23 34 35 37 MLK1005S15NJT 14.2 14.2 15.3 15.8 16.8 18 23 33 34 35 mlk1005s18njt 17.0 17.1 18.6 19.2 20.6 18 23 32 33 34 mlk1005s22njt 20.8 20.9 23.0 23.9 25.8 18 23 32 33 34 mlk1005s27njt 25.6 25.9 29.8 31.5 35.7 18 23 30 30 28 mlk1005s33njt 31.4 31.9 37.6 40.2 y 18 23 29 29 y mlk1005s39njt 37.2 38.1 48.9 yy 17 21 24 yy mlk1005s47njt 45.0 46.2 60.6 yy 18 21 24 yy mlk1005s56njt 53.7 55.4 76.7 yy 17 21 22 yy mlk1005s68njt 65.4 68.1 102.3 yy 17 20 19 yy mlk1005s82njt 79.4 83.3 137.7 yy 16 19 17 yy mlk1005sr10jt 97.4 103.7 204.7 yy 16 19 14 yy
(3/3) 006-01 / 20080407 / e521_mlk1005.fm all specifications are subject to change without notice. typical electrical characteristics inductance vs. frequency characteristics q vs. frequency characteristics packaging styles reel dimensions tape dimensions 0 1 10 100 1000 10 100 1000 10000 inductance ( nh ) frequency ( mhz ) 33nh 10nh 3.3nh 100nh 1.0nh 10 100 1000 10000 0 10 20 30 40 50 q frequency ( mhz ) 33nh 10nh 3.3nh 100nh 1.0nh 1.0 ?178 2.0 2.0 0.5 ?13 0.5 ?21 0.8 ?60 2.0 13.0 1.4 9.0 0.3 dimensions in mm 160min. taping 200min. 300min. drawing direction dimensions in mm 1.15 0.1 0.8max. 0.65 0.1 8.0 0.3 3.5 0.05 1.75 0.1 4.0 0.1 2.0 0.05 2.0 0.05 sprocket hole cavity 1.5 +0.1 ?0.0
|
